Proceed to cart
Customer support:+420702026316info@topepoxy.eu
    Currency
    EUR
    Language
    English
    Home / Epoxy Resin / Epoxy Resin and Hardener Components / DIPON Epoxyplast 3D - Part A resin

    DIPON Epoxyplast 3D - Part A resin

    Code: 6415/000500 6415/001000 6415/002000 6415/005000 6415/010000 Choose variant
    Not rated
    Brand: DIPON
    DIPON Epoxyplast 3D - Složka A
    €16,23 €24,24 €43,23 €99,61 €188,62 from €16,23 €13,41 excl. VAT €20,03 excl. VAT €35,73 excl. VAT €82,32 excl. VAT €155,88 excl. VAT from €13,41 excl. VAT €32,46 / 1 kg €24,24 / 1 kg €21,62 / 1 kg €19,92 / 1 kg €18,86 / 1 kg –
    IN STOCK (>5 pcs) IN STOCK (>5 pcs) IN STOCK (>5 pcs) IN STOCK (>5 pcs) Sold Out Choose variant
    Mass
    Chosen variant is not available. Reset selected parameters.
    Delivery to:
    20/05/2024 20/05/2024 20/05/2024 20/05/2024 19/06/2024 Choose variant
    Delivery offer

    Epoxy resin (component A) for EPOXYPLAST B20 Jewel Cast, EPOXYPLAST B50 Deep Pour, EPOXYPLAST B100 Ultra Pour

    Detailed information

    Related products

    DIPON Epoxyplast 3D B20 JEWELCAST - Part B
    DIPON Epoxyplast 3D B20 JEWELCAST - Part B
    IN STOCK
    from €6,34 excl. VAT
    from €7,67
    Detail

    Hardener for epoxy resin Epoxyplast 3D intended for small castings with a thickness of 0.1 - 2 cm (at max. 22 °C), hardens from 15 °C, hardness 83 SHORE D, VOC 0 g/L, mixing...

    Code: 6418/000250
    DIPON Epoxyplast 3D B50 DEEP POUR - Part B
    DIPON Epoxyplast 3D B50 DEEP POUR - Part B hardener
    IN STOCK (>5 pcs)
    from €6,59 excl. VAT
    from €7,97
    Detail

    Tvrdilo pro epoxidovou pryskyřici Epoxyplast 3D určené pro střední odlitky síla 0,1 - 5 cm (při max 20 °C), vytvrzuje již od 15 °C, tvrdost 81 SHORE D, VOC 0 g/L, mísící poměr...

    Code: 6424/000250
    epoxyplast 3d b100 ultrapour komponente b einzelkomponente dipon
    DIPON Epoxyplast 3D B100 ULTRAPOUR - Part B hardener
    IN STOCK (>5 pcs)
    from €6,71 excl. VAT
    from €8,12
    Detail

    Tužidlo pro epoxidovou pryskyřici Epoxyplast 3D určené pro velké odlitky o síla až 10 cm (při max 20 °C), vytvrzuje již od 10 °C, tvrdost 77 SHORE D, VOC 0 g/L, mísící poměr...

    Code: 6427/000250
    20 150Pcs 40ML Plastic Disposable Cups Dispenser Silicone Resin Mold Tool for DIY Epoxy Resin Crafts.jpg
    Plastic disposable mixing cup 40 ml, 20 Pcs
    IN STOCK (>5 pcs)
    €1,57 excl. VAT
    €1,90
    Code: 7198
    Surface PreClean - Odmašťovací sprej 400 ml
    Surface PreClean - Odmašťovací sprej 400 ml
    IN STOCK (>5 pcs)
    €8,66 excl. VAT
    €10,48
    Code: 5504
    Show all related products Previous product Next product

    Product detailed description

    DIPON EPOXYPLAST 3D - Part A Resin

    EpoxyPlast 3D Resin is a highly transparent epoxy resin with excellent UV resistance for a very wide range of applications, especially suitable for all resin art artists, wood craftsmen and floor coatings. EpoxyPlast 3D is characterised by its excellent clarity, anti-yellowing formula, achieved through suitably matched N-neck and UV blocker additives, excellent self-venting and ease of handling. EpoxyPlast 3D is ideal for all high clarity potting, embedding, floor coating, jewellery making and many other applications. Due to many superior properties compared to other systems on the market (e.g. outstanding UV stability), excellent self-venting, the white of all potting remains white. Results from our users have shown that even after two years of UV exposure, no yellowing was observed, which is extraordinary for epoxy resins. Convince yourself of this system. The EpoxyPlast 3D A component is compatible with the hardeners: B20 JewelCast, B50 DeepPour as well as B100 UltraPour, the mixing ratio always being 2:1 by weight. Total flexibility. One resin, three hardeners. That is the EpoxyPlast 3D system.


    Compatible hardeners:

    • B20 Jewel Cast
    • B50 Deep Pour
    • B100 Ultra Pour

    Safety Instructions:

    EN: ATTENTION! DANGER: Reaction product: polyoxyalkylene amine DANGER: H302 + H312 Harmful if swallowed or in contact with skin. H318 Causes serious eye damage. H411 Toxic to aquatic life with long lasting effects. Avoid the release of P273 into the environment. P280 Wear protective gloves / protective clothing / eye protection / face protection. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove any existing contact lenses. Continue rinsing. P310 Call a POISON CENTER / doctor immediately. P301 + P312 IF SWALLOWED: Call a POISON CENTER / doctor if you feel unwell. P501 Dispose of contents / container in accordance with local / regional / national / international regulations.

    luminacast 9 ocean cast epoxidharz molds diponr (1)
    DIPON LuminaCast 9 Ocean Flow - Part B
    IN STOCK
    from €5,98 excl. VAT
    from €7,23
    Detail
    Code: 7239/000250
    luminacast 9 ocean cast epoxidharz molds diponr (2)
    DIPON LuminaCast - Složka A
    IN STOCK (>5 pcs)
    from €11,94 excl. VAT
    from €14,45
    Detail
    Code: 7236/000500
    epoxyplast 3d b100 ultrapour komponente b einzelkomponente dipon
    DIPON Epoxyplast 3D B100 ULTRAPOUR - Part B hardener
    IN STOCK (>5 pcs)
    from €6,71 excl. VAT
    from €8,12
    Detail

    Tužidlo pro epoxidovou pryskyřici Epoxyplast 3D určené pro velké odlitky o síla až 10 cm (při max 20 °C), vytvrzuje již od 10 °C, tvrdost 77 SHORE D, VOC 0 g/L, mísící poměr...

    Code: 6427/000250
    luminacast 8 table cast epoxidharz molds diponr (1)
    DIPON LuminaCast 8 Table Flow - Part B
    IN STOCK (>5 pcs)
    from €5,98 excl. VAT
    from €7,23
    Detail
    Code: 7254/000250
    luminacast 1 fast set primer epoxidharz molds diponr (1)
    DIPON LuminaCast 1 Fast Set Primer - Part B
    IN STOCK (>5 pcs)
    from €5,98 excl. VAT
    from €7,23
    Detail
    Code: 7275/000250
    DIPON Epoxyplast 3D B50 DEEP POUR - Part B
    DIPON Epoxyplast 3D B50 DEEP POUR - Part B hardener
    IN STOCK (>5 pcs)
    from €6,59 excl. VAT
    from €7,97
    Detail

    Tvrdilo pro epoxidovou pryskyřici Epoxyplast 3D určené pro střední odlitky síla 0,1 - 5 cm (při max 20 °C), vytvrzuje již od 15 °C, tvrdost 81 SHORE D, VOC 0 g/L, mísící poměr...

    Code: 6424/000250
    luminacast 5 radiant flow epoxidharz molds diponr (1)
    DIPON LuminaCast 5 Radiant Flow - Part B
    IN STOCK (>5 pcs)
    from €9,65 excl. VAT
    from €11,68
    Detail
    Code: 7347/000500
    luminacast 7 design flow epoxidharz molds diponr (1)
    DIPON LuminaCast 7 Design Flow - Part B
    IN STOCK (>5 pcs)
    from €6,59 excl. VAT
    from €7,97
    Detail
    Code: 7365/000250
    luminacast 3 crystal flow epoxidharz molds diponr (1)
    DIPON LuminaCast 3 Crystal Flow - Part B
    IN STOCK
    from €5,85 excl. VAT
    from €7,08
    Detail
    Code: 7329/000250
    luminacast 2 coaster cast epoxidharz molds diponr (1)
    DIPON LuminaCast 2 Coaster Cast - Part B
    IN STOCK (>5 pcs)
    from €5,85 excl. VAT
    from €7,08
    Detail
    Code: 7278/000250
    luminacast 4 gem flow epoxidharz molds diponr (1)
    DIPON LuminaCast 4 Gem Flow - Part B
    On the Way (from 17.5.2024)
    from €9,65 excl. VAT
    from €11,68
    Detail
    Code: 7287/000500
    luminacast 10 cell flow epoxidharz molds diponr (1)
    DIPON LuminaCast 10 Cell Flow - Part B
    IN STOCK (>5 pcs)
    from €5,98 excl. VAT
    from €7,23
    Detail
    Code: 7308/000250
    luminacast 6 art flow epoxidharz molds diponr (1)
    DIPON LuminaCast 6 Art Flow - Part B
    IN STOCK (>5 pcs)
    from €6,59 excl. VAT
    from €7,97
    Detail
    Code: 7302/000250
    DIPON Epoxyplast 3D B20 JEWELCAST - Part B
    DIPON Epoxyplast 3D B20 JEWELCAST - Part B
    IN STOCK
    from €6,34 excl. VAT
    from €7,67
    Detail

    Hardener for epoxy resin Epoxyplast 3D intended for small castings with a thickness of 0.1 - 2 cm (at max. 22 °C), hardens from 15 °C, hardness 83 SHORE D, VOC 0 g/L, mixing...

    Code: 6418/000250
    Show all alternative products Previous product Next product

    Be the first who will post an article to this item!

    Do not fill out this field:

    Be the first who will post an article to this item!

    Do not fill out this field: