DIPON LuminaCast 7 Design Flow - Component B
Code: 7365/000250 7365/000500 7365/001000 7365/002500 Choose variantRelated products
Product detailed description
Dipon · Epoxy resins
DIPON LuminaCast 7 Design Flow
DIPON LuminaCast 7 Design Flow is a clear, high-viscosity epoxy resin. It is specially designed to meet the demanding needs of professional artists and designers. The high-viscosity formula allows precise applications covering both details and larger areas, turning any artwork into a masterpiece. LuminaCast 7 Design Flow holds its shape, from embedding fine pigments to creating multidimensional textures, and prevents pigments from drifting and settling. This ensures that your design stays exactly as you imagined.
Mixing ratio 2:1 by weightDemouldable after 16 - 24 h (23 °C)High viscosity - thickHolds its shape and prevents pigments from drifting
⚠️ !!! LuminaCast hardener component B only (does not contain epoxy resin - component A) !!!
Please note that this is a separate hardener for epoxy resin. You need to buy LuminaCast epoxy resin - component A separately, or buy the epoxy resin with hardener directly.
With a refractive index > 1.59, this product ranks among the most transparent kinds of epoxy resin on the market.
Properties
Key properties of LuminaCast 7 Design Flow casting resin
- Mixing ratio 2:1 by weight.
- Casting height up to 20 mm and working time up to 50 minutes depending on quantity and ambient temperature.
- Demouldable after 16 - 24 h (23 °C).
- High viscosity - thick.
- Holds its shape and prevents pigments from drifting.
- The next layer can be poured after approx. 12 - 16 h (10 mm / 20 °C).
- Creates an incomparably smooth, glossy surface.
Properties
Why choose DIPON LuminaCast 7 Design
- Maximum UV protection — The integration of UV absorbers and HALS additives ensures that LuminaCast perfectly protects your works from yellowing and UV damage.
- Casting height up to 20 mm — Up to 20 mm (20 °C) in a single pour depending on the amount of material and ambient temperature
- Working time approx. 50 min — A long working time gives you enough time to mix, pigment and degas the mixture (at 23 °C, 200 g, 20 mm)
- Mixing ratio 2:1 by weight — Very easy mixing and calculating the correct amount of each component.
How to use
Applications and uses
Technical data
Applications and uses
Surface preparationapplications for self-levelling treatments and surface corrections.
RepairsSelf-levelling surface finishes and precise repairs.
Art paintingsDesign detailed resin paintings using methods such as pouring, brushing or rolling.
For furnitureEnhancing and protecting furniture finishes.
High glossA first-class finish in the famous "piano lacquer" style.
DomingMaking high-quality domed castings.
SurfacesMirror-smooth, robust surface finishes.
TumblersArtistic cup design.
Manufacturer’s data.
Technical data
Technical data
Highly transparent castingsMaking transparent and aesthetically pleasing castings.
JewelleryDesigning beautiful jewellery, elegant trays and intricate geode coasters.
Sealing, TopCoatCreating and finishing 3D floors, luxury kitchen worktops and flawless epoxy resin tabletops.
3D floorsfloor finishing, including impressive 3D living-room floors.
Geode ArtCreating avant-garde geode artworks with a main focus on "Resin Art".
Petri-ArtThe ideal system for Petri Art effects; can be combined with colorants, especially "alcohol inks".
Manufacturer’s data.
Properties
General properties
- Crystallisation stability
- Bio-based components in the epoxy resin
- Free of CoRAP and SVHC substances
- State-of-the-art base amines and additives with a particularly low tendency to yellow
- Mixing ratio: 2:1 by weight (A+B)
- Working time (23 °C), 200 grams, 2 cm: approx. 50 minutes (23 °C -> 40 °C)
- Recommended material temperature (A+B): 20°- 24 °C
- Recommended ambient temperature: 20 °C - 25 °C
- Dynamic viscosity (mPa*s) 23 °C: A 730 ± 50
- Dynamic viscosity (mPa*s) 23 °C: B 5500 ± 50
- Working time at 23 °C (200 grams, 20 mm): approx. 50 minutes
- Time to peak exotherm (tTmax) (23 °C, 200 grams, 20 mm): approx. 100 minutes
- Mixing time: 3-4 min + transfer and another 3-4 min for a homogeneous mixture
- Mixing ratio: 2:1 by weight (A+B)
- Recommended pour height (20 °C): 0.1 cm - 2.0 cm (1 - 20 mm)
- Demouldable after (23 °C): approx. 16–24 hours
- Next layer can be poured after: approx. 12–16 hours at 20 °C, 10 mm
- Minimum recommended mixing quantity: 120 grams A+B
Additional parameters
| Category: | Individual Components of Epoxy Resin and Hardeners |
|---|---|
| EAN: | Choose variant |
| ? Temperature resistance: | 70 °C |
| ? Hardness: | 72 ShD |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | DIPON.DE Removable Automotive Coatings GmbH & Co. |
|---|---|
| Address : | Ringofenstr. 39 I 44287, Dortmund, Deutschland |
| E-mail : | info@dipon.de |