DIPON LuminaCast 6 Art Flow - component B
Code: 7302/000250 7302/000500 7302/001000 7302/002500 Choose variantRelated products
Product detailed description
Dipon · Epoxy resins
DIPON LuminaCast 6 Art Flow
DIPON LuminaCast 6 Art Flow is a high-viscosity (thick) clear epoxy resin developed especially for artists. Created for the most demanding resin projects, it combines not only excellent flow but also a flawless surface finish. With a refractive index > 1.59, it is one of the most transparent epoxy resins on the market.
Mixing ratio 2:1 by weightDemouldable after 16 - 24 h (23 °C)Creates an incomparably smooth, glossy surfaceMaximum UV protection
⚠️ !!! LuminaCast hardener component B only (does not contain epoxy resin - component A) !!!
Please note that this is a separate hardener for epoxy resin. You need to buy LuminaCast epoxy resin - component A separately, or buy the epoxy resin with hardener directly.
Properties
Key features of LuminaCast 6 Art Flow casting resin
- Mixing ratio 2:1 by weight.
- Casting height up to 20 mm and working time up to 50 minutes depending on quantity and ambient temperature.
- Demouldable after 16 - 24 h (23 °C).
- The next layer can be poured after approx. 12 - 16 h (10 mm / 20 °C).
- Creates an incomparably smooth, glossy surface.
- The advanced formula minimises carbamate formation and ensures a flawless, spot-free surface.
- High-viscosity consistency: apart from LuminaCast 7 Design Flow, LuminaCast 6 Art Flow has the highest viscosity for the slowest flow.
Properties
Why choose DIPON LuminaCast 6 Art
- Maximum UV protection — The integration of UV absorbers and HALS additives ensures that LuminaCast perfectly protects your works from yellowing and UV damage.
- Casting height up to 20 mm — Up to 20 mm (20 °C) in a single pour depending on the amount of material and ambient temperature
- Working time approx. 50 min — A long working time gives you enough time to mix, pigment and degas the mixture (at 23 °C, 200 g, 20 mm)
- Mixing ratio 2:1 by weight — Very easy mixing and calculating the correct amount of each component.
How to use
Applications and uses
Technical data
Applications and uses
Highly transparent castingsMaking transparent and aesthetically pleasing castings.
JewelleryDesigning beautiful jewellery, elegant trays and intricate geode coasters.
Sealing, TopCoatCreating and finishing 3D floors, luxury kitchen worktops and flawless epoxy resin tabletops.
3D floorsfloor finishing, including impressive 3D living-room floors.
Geode ArtCreating avant-garde geode artworks with a main focus on "Resin Art".
Petri-ArtThe ideal system for Petri Art effects; can be combined with colorants, especially "alcohol inks".
Manufacturer’s data.
Technical data
Technical data
RepairsSelf-levelling surface finishes and precise repairs.
Art paintingsDesign detailed resin paintings using methods such as pouring, brushing or rolling.
For furnitureEnhancing and protecting furniture finishes.
High glossA first-class finish in the famous "piano lacquer" style.
DomingMaking high-quality domed castings.
SurfacesMirror-smooth, robust surface finishes.
TumblersArtistic tumbler design.
Manufacturer’s data.
Properties
General properties
- Crystallisation stability
- Bio-based components in the epoxy resin
- Free of CoRAP and SVHC substances
- State-of-the-art base amines and additives with a particularly low tendency to yellow
- Mixing ratio: 2:1 by weight (A+B)
- Working time (23 °C), 200 grams, 2 cm: approx. 50 minutes (23 °C -> 40 °C)
- Recommended material temperature (A+B): 20°- 24 °C
- Recommended ambient temperature: 20 °C - 25 °C
- Dynamic viscosity (mPa*s) 23 °C: A 730 ± 50
- Dynamic viscosity (mPa*s) 23 °C: B 4100 ± 50
- Working time at 23 °C (200 grams, 20 mm): approx. 50 minutes
- Time to peak exotherm (tTmax) (23 °C, 200 grams, 20 mm): approx. 100 minutes
- Mixing time: 3-4 min + transfer and another 3-4 min for a homogeneous mixture
- Mixing ratio: 2:1 by weight (A+B)
- Recommended pour height (20 °C): 0.1 cm - 2.0 cm (1 - 20 mm)
- Demouldable after (23 °C): approx. 16–24 hours
- Next layer can be poured after: approx. 12–16 hours at 20 °C, 10 mm
- Minimum recommended mixing quantity: 120 grams A+B
Additional parameters
| Category: | Individual Components of Epoxy Resin and Hardeners |
|---|---|
| EAN: | Choose variant |
| ? Temperature resistance: | 70 °C |
| ? Hardness: | 72 ShD |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | DIPON.DE Removable Automotive Coatings GmbH & Co. |
|---|---|
| Address : | Ringofenstr. 39 I 44287, Dortmund, Deutschland |
| E-mail : | info@dipon.de |