Ice Epoxy ICE CAST - Deep Casting Epoxy Resin

Application and use

1. Ensure that the room temperature of the Ice Cast resin and hardener is maintained at 15-21°C.
2. In a dry, clean container, mix 2 parts resin(A) with 1 part hardener(B).
3. Stir thoroughly for 1-2 minutes. Mix well along the inside wall of the container so that no unmixed deposits remain on the walls. For mixing, we recommend using Allway Tools Helix.
4. Then let it sit for 3-5 minutes.

TIP: We recommend warming the resin and hardener to 21-23°C before actual casting, which improves fluidity and aids in the natural outgassing of the mixture.

Cleaning

Use acetone to clean used application items. Once the epoxy resin has cured, it can only be removed by sanding. It is recommended to clean immediately after use.

• Resin should be stored in a dry place, at a minimum temperature of 10°C, out of the sun and out of reach of children.
• Resin and hardener should not be stored in an open container.
• Application should be carried out where humidity is below 60% and temperature is between 15 - 21°C. If necessary, use a dehumidifier.
• Ice Cast should be used within one year of purchase.

Security Information and Documents

• Technical Data Sheet - Ice Epoxy ICE CAST
• ICE CAST Safety Data Sheet Folder A
• ICE CAST Component B Safety Data Sheet

ICE CAST Component A

WARRING! Contains:Phenol epoxy resin, 1,4-butanediol-diglycidyl ether

H315 Irritating to skin.H317 May cause allergic skin reaction. H319 Causes severe eye irritation. H411 Toxic to aquatic organisms, with long-lasting effects. P102 Keep out of reach of children. P270 Do not eat, drink or smoke when using this product. P301+P310 IF INGESTED: Call the TOXIC INFORMATION CENTER/physician immediately. H302 + H312 + H332 Harmful if swallowed, in contact with skin or if inhaled. P101 If medical attention is required, keep product container or label handy. P102 Keep out of reach of children. P261 Avoid inhalation of dust/smoke/gas/mists/vapours/aerosols. P264 Wash hands and affected body parts thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in well-ventilated areas. P272 Do not remove contaminated work clothing from the workplace. P273 Avoid release into the environment. P280 Wear protective gloves/protective clothing/goggles/face shield. P301+P330+P331 IF INGESTED: Rinse mouth. DO NOT remove from the toilet. P302+P352 IN CASE OF CONTACT WITH SKIN: Wash with plenty of water. P304+P340 IF BREATHING: Move person to fresh air and keep in a position to facilitate breathing. P305+P351+P338 IF EYES ARE CUT: Gently flush with water for several minutes. Remove contact lenses, if fitted and if easily removable. Continue rinsing. P312 If you do not feel well, call the TOXIC INFORMATION CENTER/physician. P333+P313 If skin irritation or rash: seek medical attention/treatment. P337+P313 If eye irritation persists: Seek medical advice/treatment. P362+P364 Remove contaminated clothing and wash before reuse. P391 Collect spillage. P405 Store locked. P501 Dispose of contents/packaging by taking to hazardous waste section of collection yard. EUH 205 Contains epoxy components. May cause an allergic reaction.

UFI: NTV9-3AAY-D009-CCNC

ICE CAST component B

DANGER! Contains:Amines, ethoxylated, tallow alkyne, 1,4-butanediol-diglycidyl ether

H302 Harmful if swallowed. H315 Irritating to skin. H317 May cause allergic skin reaction. H319 Causes severe eye irritation. H411 Toxic to aquatic life, with long-lasting effects. P101 If medical attention is required, keep product container or label handy. P102 Keep out of reach of children. P261 Avoid inhalation of dust/smoke/gas/mists/vapours/aerosols. P264 Wash hands and affected body parts thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P272 Do not remove contaminated work clothing from the workplace. P273 Avoid release into the environment. P301+P330+P331 IF INGESTED: Rinse mouth. DO NOT induce vomiting. P302+P352 IN CASE OF CONTACT WITH SKIN: Wash with plenty of water. P305+P351+P338 IN CASE OF EYE CONTACT: Rinse gently with water for several minutes. Remove contact lenses, if fitted and if easily removable. Continue rinsing. P312 If you do not feel well, call the TOXIC INFORMATION CENTER/physician. P333+P313 If skin irritation or rash: seek medical attention/treatment. P337+P313 If eye irritation persists: Seek medical advice/treatment. P362+P364 Remove contaminated clothing and launder before reuse. P391 Collect spillage. P405 Store locked. P501 Dispose of contents/packaging by taking to hazardous waste section of collection yard.

UFI: 0WV9-MA1C-Q005-0Q7E