Rubio Monocoat Hybrid Wood Protector Sunflower

Rubio Monocoat Hybrid Wood Protector Sunflower

Hybrid Wood Protector is a genuine ‘monocoat’, suitable for coloring and protecting exterior wood in 1 single layer. The exterior oil finish protects wooden decks, patios, façades, doors, shutters, carports, garden furniture, gazebos, pergolas, etc. from discoloration and weathering. The easy application and maintenance makes this oil an exceptionally user-friendly product. 

Instructions

An overview of instructions. Please consult the TDS here for complete product information.

Application

Garden furniture, windows, doors, vertical surfaces and other wooden exterior objects

1. Dampen the surface with water. Use a garden hose, but avoid a pressure washer, as pressure washing may cause surface damage with improper use. If the wood surface has been treated with a finish other than Hybrid Wood Protector, the previous finish must be removed before applying Hybrid Wood Protector. Ensure that any previous finish is removed by starting with a low grit and working up in consecutive grits (e.g... 40, 80,100,120).
2. Apply undiluted Exterior Wood Cleaner. Always use protective gloves, glasses, or a face-shield.
3. Scrub the treated area with a stiff bristle nylon brush in the lengthwise direction of the wood until it is clean. In case of stubborn residue, repeat the treatment with Exterior Wood Cleaner. Keep the surface wet with the cleaning solution for 10-15 minutes.
4. Rinse thoroughly with water until all the foam and dirt residue has disappeared, and let the surface completely dry.
5. Stir the Hybrid Wood Protector thoroughly until a consistent mixture is obtained. Carefully add 10% Rubio Monocoat Accelerator (Part B) to the oil. Pot life is 4-6 hours. Only mix what you can use up within that time frame. For vertical surfaces, Accelerator (Part B) is not required.
6. Apply a layer of Hybrid Wood Protector with a firm bristle paint brush.
7. Leave the oil to react for 10 minutes. Then smooth the surface again with the same brush (without applying new product).
8. After 5 minutes, gently wipe off the surface with a lint free cloth to remove traces of excess oil until it appears even.
9. Let dry for about 24 hours. Complete curing takes place after 7 days.

Wood decking

1. Dampen the surface with water. Use a garden hose but never a pressure washer. Pressure washing may cause surface damage with improper use. If the wood surface has been treated with a finish other than Hybrid Wood Protector, the previous finish must be removed before applying Hybrid Wood Protector. Ensure that any previous finish is completely removed by starting with a low grit and work up in consecutive grits (e.g... 40, 60, 80 max).
2. Apply undiluted Exterior Wood Cleaner. Always use protective gloves, glasses, or a face-shield.
3. Scrub the treated area with a stiff bristle nylon brush in the lengthwise direction of the wood until it is clean. In case of stubborn residue, repeat the treatment with Exterior Wood Cleaner. Keep the surface wet with the cleaning solution for 10-15 minutes.
4. Rinse thoroughly with water until all the foam and dirt residue has disappeared, and let the surface completely dry.
5. Stir the Hybrid Wood Protector thoroughly until a consistent mixture is obtained. Carefully add 10% Rubio Monocoat Accelerator (Part B) to the oil. Pot life is 4-6 hours. Only mix what you can use up within that time frame.
6. Apply Hybrid Wood Protector to 3-4 deck boards at a time. Use a firm bristle paint brush, and spread the oil in the direction of the wood. A buffer outfitted with a thick red buffer pad may also be used.
7. Leave the oil to react for 10 minutes. Then smooth the surface again with the same brush (without applying new product).
8. After 5 minutes, wipe the surface with a lint-free cloth to remove excess oil until the finish looks even (or use a thick white buffer pad when using a buffer).
9. Let dry for about 24 hours. Complete curing takes place after 7 days.

Maintenance

When the finished wood shows weathering, a maintenance application of Hybrid Wood Protector in the original applied color is required. The surface needs to be cleaned and prepared correctly before using a maintenance application of Hybrid Wood Protector.

Horizontal surfaces such as decking and furniture

For decking, steps, and tables/chairs, a maintenance coat of Hybrid Wood Protector is generally needed annually after the initial application. The maintenance coat should be applied before the weather becomes unsuitable (even if it has been less than one year since the initial application).

Follow the maintenance steps outlined below.

Vertical surfaces such as siding and shutters

A maintenance coat of Hybrid Wood Protector on vertical exposures is required less frequently. The severity of exposure determines the necessary frequency of a maintenance coat application. A Southern/Western exposure typically needs a maintenance application sooner than on Northern/Eastern exposure. Expect a maintenance coat on the most weather-exposed sides within 2-3 years. Follow the maintenance steps outlined below.

1. Clean the wood surface thoroughly with Exterior Wood Cleaner. For lightly weathered surfaces, dilute 1-part cleaner with 2-parts clean water. For medium to heavily weathered surfaces, dilute 1-part cleaner to 1-part clean water.
2. See our recommended application instructions for horizontal or vertical surfaces above.