Rubio Monocoat Oil Plus 2C TITANIUM GREY 350 ml
Code: 6631Related products
A product for perfectly cleaning the surface before oiling and for cleaning tools, brushes, etc. Technical data sheet
Universal maintenance oil is used to boost the sheen (approx. satin look) and nourish wood treated with Rubio Monocoat oil, giving it a fuller look. It can also be used to...
Pad for oiling, wiping and buffing wooden surfaces. Diameter 150 mm, thickness 10 mm
RMC Applicator Set contains 1 handle and 5 white application pads RMC Applicator Pad.
The set contains 1 handle and 5 beige RMC Scrubby Pad application pads. Used for hand application of Rubio Monocoat oils such as Oil Plus 2C and Hybrid Wood Protector.
Citrus Solvent — a natural solvent from citrus peels (100 % d-limonene). An ideal thinner for tung and linseed oil: the first coat penetrates deeper into the wood and dries...
Chalk-Tique Powder Additive — an additive that turns any latex, acrylic or water-based paint into a thick chalk paint. It adheres to wood, glass, ceramics, laminate, metal and...
Used for hand application of Rubio Monocoat oils such as Oil Plus 2C and Hybrid Wood Protector.
The blue handle attaches to the white and beige pads and helps with easy application of our Rubio Monocoat oils
Product detailed description
Rubio Monocoat Oil Plus 2C TITANIUM GREY - Hard wax oil with accelerator for interior wood protection
Rubio® Monocoat Oil Plus 2C is a representative of a new generation of high-quality and ecological wood surface treatment . If you are looking for a suitable oil for wooden floors, furniture or toys , you have come to the right place! RMC Oil Plus 2C meets the strictest requirements of European and American hygiene standards and at the same time excels in its long-term resistance to abrasion and water. Everyone who works with wood is looking for the easiest way to treat the surface and, above all, to do it quickly and without "cats". We can completely fulfill this requirement!
All you have to do is spread the oil with a sponge or a pad, then wipe it dry with a cloth and you're done - there's no more risk of leaving a thumbprint on the surface when handling your piece!

Key properties of Rubio Monocoat Oil Plus 2C
- Consumption: 30 – 50 m2 from one litre
- For stressed surfaces: floors, stairs, dining tables, kitchen worktops, bathroom furniture, etc.
- Thanks to the accelerator, we get a surface with increased resistance to abrasion and the action of water.
- Easy work without "cats"
- Solvent free = VOC 0%
- Product based on natural products.
- Does not contain water.
- The natural appearance of the wood will be preserved.
- Very low consumption = cost-effective product!
- Suitable for all types of wood - furniture, wall cladding, etc.
- Easy maintenance of oiled surfaces - long-term protection.
- Very fast curing: 80% in 2 days.
- Water and heat resistant, ideal for kitchens and bathrooms.
Ecological composition and a wide range of colors
The basis is linseed oil, the other components are mixtures of natural waxes, oils and color pigments , thanks to which we can offer a wide range of color shades already in the standard offer. The colors can be mixed with each other, so you can easily handle requests for special color variations. If 40 basic colors are not enough, we offer other options in the form of reactive or non-reactive preparations for coloring wood before the final protective layer. The next one will only be up to your imagination.


Focused on quality and a healthy interior

Does not contain solvents
Unlike other wood oils, Rubio Monocoat products contain no volatile organic compounds (VOCs) and are environmentally friendly.
Safe to use in the kitchen and on toys
Rubio Monocoat Oil Plus 2C and RMC Hybrid Wood Protector meet the EN 71-3 standard and are completely safe to use on wooden toys, kitchen tops, dining tables, etc.
For food contact
Rubio Monocoat Oil Plus 2C is fully compliant when applied to a wooden surface.
Instructions for use
- Sand the surface of the wood carefully, any previous coating must be removed. Vacuum with a vacuum cleaner and remove the remaining dust with RMC Cleaner.
- (applies only to the 2C version with accelerator) Mix oil with accelerator (1-2 minutes) in a ratio of approximately 3:1 (3 parts oil A and 1 part accelerator B).
- Once the surface is dry after cleaning, spread a small amount of RMC Oil Plus 2C oil (with a cloth, sponge or polishing machine fitted with a beige pad). Work in sections of 5 – 10 m2.
- Allow the oil to react for a few minutes and then wipe off any excess oil (with a rag or polisher fitted with a white pad). Wipe each section within 15 minutes. The surface must be dry to the touch! Complete the entire work in the same way.
- In a well-ventilated room, the surface can be used 24-36 hours after application.
Maintenance with water and RMC cleaning agents can be carried out after 5-7 days. Rubio® Monocoat must be used for maintenance as a guarantee for long-term durability and surface resistance.
Tips and tricks
- The product MUST NOT be diluted with anything!
- Mix the oil (A) thoroughly before application.
- For large areas and when using multiple packages, we recommend mixing them together to achieve a uniform color shade.
Packaging
- 20 ml / 100 ml / 300 ml / 1 L / 2,75 L – only RMC Oil Plus 2C (A) does not contain an accelerator
- 130 ml – set of 100 ml RMC Oil Plus 2C (A) + 30 ml RMC Accelerator (B)
- 390 ml – set of 300 ml RMC Oil Plus 2C (A) + 90 ml RMC Accelerator (B)
- 1.3 l – set 1 l RMC Oil Plus 2C (A) + 0.3 l RMC Accelerator (B)
- 3.5 l – set 2.75 l RMC Oil Plus 2C + 0.75 l RMC Accelerator (B)

FAQ's
Is Oil Plus 2C safe to use on cutting boards?
We do not recommend using Oil Plus 2C on cutting boards or butcher blocks that will be used for cutting.
Rubio Monocoat oil forms a molecular bond with the topmost microns of the wood. A knife can cut deeper than the product penetrates, leaving raw wood exposed and susceptible to mold and or bacteria growth.
However, as our product is safe to use on food surfaces, it is acceptable to use on charcuterie and serving boards.
Can I put a lacquer over Oil Plus 2C finish?
We cannot guarantee adhesion, so you must discuss this with the lacquer manufacturer.
Can I use Oil Plus 2C over our existing finish?
No, Oil Plus 2C must come in contact with raw cellulose in order to properly work.
How can I add more sheen?
Universal Maintenance Oil can be applied over Oil Plus 2C to increase the sheen level by 6-8%. Universal Maintenance Oil should not be applied to raw wood.
How soon can I apply Universal Maintenance Oil?
You can use Universal Maintenance Oil 48 hours after the proper application of Oil Plus 2C.
Do I have to use multiple coats for certain species of wood?
Because the product will not bond to itself, multiple coats are not needed. On softer species like walnut, a second application may be necessary to make sure that all areas have fully had the opportunity to react with the oil.
Can I cover floors after they have been finished with Oil Plus 2C?
Yes, wood floors finished with Oil Plus 2C can be covered with a non-staining construction paper 48 hours after application.
Please remember:
- Never tape directly to the floor.
- Only tape paper to paper.
- Covering the floor will extend the cure time.
How long does Rubio Monocoat last?
A lifetime with proper maintenance. We would expect the first maintenance to be needed somewhere between 2 and 5 years depending on wear.
Does Oil Plus 2C work on all wood species?
Yes
What is the recommended sanding grit?
Recommended final sanding grit is 120 - 150. We recommend sanding according to industry guidelines.
What is the Oil Plus 2C curing time?
Under typical application and drying conditions:
- 24 hours - Gently handle or walk with socks
- 48 hours - Furniture can be introduced (no mats or carpets)
- 5 days - Full cure and liquid resistance.
How long do I have to wait to walk on the floor after applying Oil Plus 2C?
You can walk on the floor with dry socks 8 hours after a proper application. However, it is best practice to wait 24-36 hours before walking on the floor.
Additional parameters
| Category: | Interior Protection - Wood Finish |
|---|---|
| Weight: | 0.46 kg |
| Curing time: | 5 days |
| Volume: | 350 ml |
| VOC Content: | 0% |
| Number of Coats: | 1 |
| System: | 2K set (oil + accelerator) |
| Shelf Life: | 36 months |
| Coverage per coat: | 30 - 50 m2 per Liter |
| ? Application for: | Wooden floors, Parquet floors, Stairs, Tables and tabletops, Kitchen worktops, Furniture, Wooden walls and ceilings |
| ? Environment of use: | Interior |
| ? Product type: | Hardwax oils |
| ? Resulting wood shade: | Grey shades |
Titanium grey — coloured hardwax oil with accelerator. Titanium mid-grey, technically clean. Colours and protects wood in a single coat. 🎨 Shade: Titanium grey 🍽️...
Titanium grey — coloured hardwax oil with accelerator. Titanium mid-grey, technically clean. Colours and protects wood in a single coat. 🎨 Shade: Titanium grey 🍽️...
Coloured hardwax oil without accelerator, suitable for lightly used surfaces - furniture, interior wood panelling, etc. Applied in a single coat only! Technical data sheet
Coloured hardwax oil with accelerator in the shade Dulce — caramel golden brown for heavily used wood — floors, stairs, kitchen and dining tops. Colours and protects in a single...
Coloured hardwax oil with accelerator in the shade Fern — muted fern green for heavily used wood — floors, stairs, kitchen and dining tops. Colours and protects in a single...
Accelerator for Oil Plus 2C oil. For faster curing and more durable surface protection.
Coloured Oil Plus 2C oil in the shade Hazelnut — hazelnut brown — component A on its own without accelerator. For full resistance on heavily used surfaces, mix it with...
Coloured Oil Plus 2C oil in the shade Dark Roast — very dark, heavily roasted brown — component A on its own without accelerator. For full resistance on heavily used surfaces,...
Biscuit — coloured hardwax oil with accelerator. Light biscuit beige, warm and neutral. Colours and protects wood in a single coat. 🎨 Shade: Biscuit 🍽️ Food safe (EN...
Coloured Oil Plus 2C oil in the shade Light Roast — lighter coffee brown — component A on its own without accelerator. For full resistance on heavily used surfaces, mix it with...
Coloured hardwax oil with accelerator in the shade Vienna — warm Vienna-roast brown for heavily used wood — floors, stairs, kitchen and dining tops. Colours and protects in a...
Coloured hardwax oil with accelerator in the shade Red Velvet — red-brown with a wine-red hint for heavily used wood — floors, stairs, kitchen and dining tops. Colours and...
Coloured hardwax oil with accelerator in the shade Golden Hour — rich amber golden brown for heavily used wood — floors, stairs, kitchen and dining tops. Colours and protects in...
Coloured Oil Plus 2C oil in the shade Dulce — caramel golden brown — component A on its own without accelerator. For full resistance on heavily used surfaces, mix it with...
Coloured Oil Plus 2C oil in the shade Black — deep black for a dramatic, elegant look — component A on its own without accelerator. For full resistance on heavily used surfaces,...
Ice brown — coloured hardwax oil with accelerator. Cool icy brown with a grey tinge. Colours and protects wood in a single coat. 🎨 Shade: Ice brown 🍽️ Food safe (EN...
How to apply Oil Plus 2C to Cabinets
How to apply Oil Plus 2C to Epoxy River Table
How to oil your new wooden floor with the Oil Plus 2C
Rubio Monocoat Oil Plus 2c Application with a Polishing Machine
Rubio Monocoat Oil Plus 2c Furniture Application (Manual)
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
