Rubio Monocoat Oil Plus 2C Cotton White – component A
Code: 6673/000006 6673/000020 6673/000100 6673/000300 6673/001000 6673/002750 Choose variantRelated products
Product detailed description
Oil Plus 2C Cotton White — component A. Coloured oil for mixing with accelerator.
Shade Cotton White — pure cotton white for gentle lightening. Component A is Oil Plus 2C oil on its own, without accelerator: for topping up oil, smaller projects, testing a shade or mixing your own colours. For full resistance on heavily used surfaces, mix it with accelerator B in a 3 : 1 ratio — it then colours and protects the wood in a single coat.
How Cotton White looks on different woods
The same shade looks different on every wood — it depends on the species, the grain and the sanding grit. Here is Cotton White on light oak, yellow pine and dark walnut. The photos are manufacturer samples and on-screen colours are approximate — the manufacturer recommends testing the shade on the same wood, sanded the same way (6 ml sample). Compare all 40 shades on 11 wood species in the Rubio Monocoat colour chart.
Oak
Cotton White on solid oak
Pine
Cotton White on pine
Walnut
Cotton White on walnut
This is how Cotton White colours wood as you apply it.
Manufacturer's video: Oil Plus 2C Cotton White applied in a single coat on white oak. You can see how the oil deepens the grain and the tone the wood takes on.
- the real shade on real wood
- one coat = the final look
- on other woods the shade looks different — see the photos above
Oil without accelerator — when you need it separately.
The 2C set contains oil and accelerator in a 3 : 1 ratio. Component A on its own makes sense when you are running out of oil but still have accelerator, when you want to test a shade on a larger piece, or when you are mixing your own colour from several shades.
- topping up oil for accelerator you already have
- testing a shade on a larger sample (20 ml ≈ 0.8 m²)
- mixing your own shade from several colours
- accelerator B is the same for all shades — Oil Plus 2C Accelerator
Even your first finish will turn out well
The whole ritual from preparation to full cure — what matters most is wiping off the excess within 30 minutes of application.
1 · Prepare the surface
Sand the wood to grit 120 (range 100–150) and remove any old finish down to bare wood. Vacuum and remove remaining dust with Rubio Monocoat Raw Wood Cleaner; apply the oil only to a dry surface.
2 · Mix 3 : 1
Stir oil A thoroughly first, then mix it with accelerator B for 1–2 minutes in a ratio of approx. 3 : 1. Use the mixed oil within 4–6 hours.
3 · Apply section by section
Spread a small amount with a Rubio Monocoat pad or a spatula and work it into the wood. Work in sections of 5–10 m².
4 · Wipe dry
Let the oil react for at least 5 minutes and keep spreading it with the pad. Within 30 minutes wipe off all excess with a clean cloth — the surface must feel dry to the touch.
5 · Let it cure
The oil dries in 24 hours. Dry cleaning (vacuum, broom) after 2 days at the earliest, washing with water and Rubio Monocoat soap after 5 days at the earliest.
⚠️ The most common mistake
The product MUST NOT be thinned with anything and stir the oil (A) before application and regularly while you work. Excess that is not wiped off stays sticky — always wipe dry within 30 minutes. On large areas, mix packs from different batches together for an even shade. Rags soaked in oil can self-ignite — soak them in water after use.
Oil Plus 2C Cotton White — component A
Source: Rubio Monocoat — Oil Plus 2C technical data sheet (manufacturer, 3/2026)
Choose the pack size below in the variants. The ready-made set of oil with accelerator (130 ml to 3.5 L) is in the Type switch above.
Documents
Storage
- in the original packaging, dry, at 5–30 °C — must not freeze
- shelf life up to 36 months (manufacturer)
- close opened packs tightly
- out of reach of children
Frequently asked questions
Do I have to mix component A with accelerator?
For full resistance on heavily used surfaces, yes — oil A and accelerator B in a ratio of approx. 3 : 1. The accelerator is the same for all shades and is sold separately (Oil Plus 2C Accelerator). Oil on its own without accelerator is for less heavily used surfaces and takes longer to cure.
How many m² will 20 and 100 ml cover?
According to the manufacturer, 20 ml covers roughly 0.8 m² and 100 ml covers 3–5 m² (coverage 30–50 m²/l depending on the wood species and preparation).
Can I mix shades together?
Yes. The manufacturer states that the 40 standard shades can be mixed to create your own colour. When working with several packs, mix them together for an even shade.
When can I use and wash the surface?
The oil dries in 24 hours; full cure takes 5 days (80 % in 2 days). Dry cleaning (vacuum, broom) after 2 days at the earliest, washing with water and Rubio Monocoat soap after 5 days at the earliest.
Is Oil Plus 2C safe for food contact?
Yes, it meets the EN 71-3 standard and is suitable for direct food contact — on serving boards, dining tables and kitchen worktops. We do not recommend it for chopping boards: a knife can cut deeper than the oil penetrates, and the exposed raw wood is then prone to mould.
Additional parameters
| Category: | Interior Protection - Wood Finish |
|---|---|
| EAN: | Choose variant |
| Volume: | 20 ml, 100 ml, 275 ml, 1 L, 2,75 L |
| VOC Content: | 0% |
| Number of Coats: | 1 |
| System: | 2K – oil only (component A) |
| Shelf Life: | 36 months |
| Coverage per coat: | 30 - 50 m2 per Liter |
| ? Application for: | Wooden floors, Parquet floors, Stairs, Tables and tabletops, Kitchen worktops, Furniture, Wooden walls and ceilings |
| ? Environment of use: | Interior |
| ? Product type: | Hardwax oils |
| ? Resulting wood shade: | Natural and light shades |
How to apply Oil Plus 2C to Epoxy River Table
How to oil your new wooden floor with the Oil Plus 2C
Jak aplikovat Oil Plus 2C na epoxidový stůl
Rubio Monocoat Oil Plus 2c Application with a Polishing Machine
Rubio Monocoat Oil Plus 2c Furniture Application (Manual)
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!