DIPON LuminaCast 1 Fast Set Prime 3 kg - Low Viscosity Epoxy Resin, Thickness 7 mm
Code: 7204/003000Related products
Product detailed description
Fast Set Primer 3 kg. A fast base under every big pour.
Pack 3 kg — most popular pack — sealing table tops and fast intermediate layers. Fast-curing epoxy primer: seals wood and absorbent substrates, eliminates rising bubbles and can be overpoured with the main cast after just 1–2 hours. Refractive index > 1.59.
The base that decides the result.
Fast Set Primer seals absorbent substrates before a big pour — and handles quick small pours up to 7 mm too.
Sealing under river tables
Sealed wood releases no bubbles into the main casting.
Sealing coat & repairs
Fast sealing of absorbent surfaces and repair of small defects after routing.
Quick small pours
Up to 7 mm — jewellery and decorations you do not want to demould for two days.
How much resin for your project?
Click on a size — you will see the current price and availability right next to it.
and first sealing coats Most popular3 kgsealing boards
and fast layers 7,5 kga base under
a series of boards 15 kgworkshop
and series Best price/kg30 kgfull
production
Seal the substrate. Pour again in two hours.
The low viscosity penetrates deep into fibres and absorbent surfaces — it seals quickly and effectively. No waiting overnight: the main pour follows the same day.
- Next layer after just 1–2 hours (20 °C)
- Demoulding after 2–4 hours (23 °C)
- Effectively reduces or eliminates rising bubbles
- Repairs of small defects after routing
The same DNA as the whole LuminaCast range.
Every LuminaCast system is made at DIPON's own production site in Germany: UV absorbers + HALS additives against yellowing, a formulation free of substances on the sVHC and CoRAP lists, and degassing components more than 70 % from renewable sources.
- UV absorbers + HALS — no yellowing in the long term
- Free of sVHC and CoRAP substances
- The systems in the range combine in a project — each has its role
Parameters you can rely on
Measured at 23 °C, 200 g, 5 mm layer — source: DIPON TDS
Compatible with wood, concrete, glass, metal, glass and carbon fibre fabrics, natural stone, silica sand, marble and granite.
Your first sealing coat will work out too
Check the temperature
Room temperature for material and surroundings. With a fast system, a higher temperature shortens the working time further.
Test the substrate
A preliminary compatibility test of the materials you are going to embed.
Weigh out exactly 2:1
Always by weight (100:50). Maximum deviation 0.1 % — more means a sticky film or a soft casting.
Mix twice for 3–4 minutes
Mix → pour into a clean container → mix again. Max. 300 rpm, ideally with with an Allway Helix mixer.
Apply and finish within 15 minutes
A thin sealing layer with a brush or poured, or a pour up to 7 mm. After 1–2 hours overpour with the main system.
⚠️ The most common mistake
Never mix by eye straight from bottles A and B. An inaccurate ratio = incomplete curing. Always weigh both components to the gram. Cleaning tools: acetone or universal thinner, immediately after use.
A set for large castings — resins that belong together
One project, four roles: sealing the substrate, small repairs, medium and large pours. Combine them.
| LuminaCast 1 ★Fast Set PrimerThis product | LuminaCast 4Gem FlowDetail | LuminaCast 8Table FlowDetail | LuminaCast 9Ocean FlowDetail | |
|---|---|---|---|---|
| Role in the project | Sealing and priming coat | Small repairs and embedding | Table tops, smaller rivers and lamps | Deep river tables, large moulds and lamps |
| Max. casting thickness | 7 mm | 20 mm | 5 cm | 10 cm |
| Working time | 15 min | 55 min | 180 min | 240 min |
| Viscosity (23 °C) | 120 mPa·s | 890 mPa·s | 70 mPa·s | 50 mPa·s |
📊Compare the whole LuminaCast rangeAll 10 hardeners — viscosity, working time and casting thickness in one clear table▼
| Type | Viscosity* (23 °C) | Working time** | Max. casting thickness | Use |
|---|---|---|---|---|
| LC 1 Fast Set Primer ★ | 120 mPa·s | 15 min | 7 mm | priming and sealing coat for wood, overpour after 60–120 min |
| LC 2 Coaster Cast | 290 mPa·s | 35 min | 15 mm | highly transparent embedding and shapes |
| LC 3 Crystal Flow | 140 mPa·s | 35 min | 10 mm | laminating & resin art |
| LC 4 Gem Flow | 890 mPa·s | 55 min | 20 mm | art & embedding, thicker pours |
| LC 5 Radiant Flow | 1330 mPa·s | 60 min | 20 mm | art & embedding, slower flow |
| LC 6 Art Flow | 4100 mPa·s | 50 min | 20 mm | painting techniques, top coat, sealing |
| LC 7 Design Flow | 5500 mPa·s | 50 min | 20 mm | special spreading, thin layers |
| LC 8 Table Flow | 70 mPa·s | 180 min** | 5 cm | river tables, lamps, larger castings |
| LC 9 Ocean Flow | 50 mPa·s | 240 min** | 10 cm | river tables and very large castings |
| LC 10 Cell Flow | 2500 mPa·s | 50 min | 20 mm | cell effects, Petri art |
* Viscosity at 23 °C — it rises sharply as the temperature drops. ** Measured on 200 g; LC 8 and LC 9 on 500 g / 9 cm. Time to max. exotherm ≈ 2× the working time.
★★★★★ from those who already create
„Perfect for coasters“
Ladislava Š. · verified purchase
„It is lovely to work with, it mixes very well…“
Ladislava Š. · verified purchase
„A great epoxy for my products!“
Branislav S. · verified purchaseHow much Fast Set Primer resin do you need?
Enter the dimensions of your casting — we will calculate the amount, the component ratio and the best pack combination.
Frequently asked questions
How thick a layer can I pour?
1–7 mm in a single layer at 20 °C. Fast Set Primer is built for thin sealing and priming layers, not for deep castings.
How soon can I overpour with the main cast?
After approx. 1–2 hours at 20 °C — hence „Fast Set“. The big pour can start the same day.
Why seal wood before pouring?
Absorbent wood releases air into a fresh casting — bubbles keep rising for hours after pouring. Sealing closes the surface and the main pour stays clear.
How much will 3 kg cast?
3 kg of mixture (components A + B) equals approximately 2.8 l of casting (density 1.07 kg/l). The calculator above works out the exact amount for your project.
Why is 3 kg the most popular pack?
It is the most versatile balance of quantity and storage — approx. 2.8 litres of mixture covers most common projects.
Your project starts with a good base.
Additional parameters
| Category: | Penetrating Epoxy Resins |
|---|---|
| Weight: | 3.24 kg |
| ? Processing time: | Very short |
| Epoxy system: | LuminaCast 1 |
| Colour: | Clear, Highly transparent |
| Package weight: | 3 Kg |
| Refractive index: | > 1,59 |
| Food contact: | Yes |
| Max casting thickness: | 0,7 cm |
| VOC Content: | 0 % |
| ? UV Resistance: | Yes, Maximum |
| ? Temperature resistance: | 70 °C |
| ? Hardness: | 72 ShD |
| Type of use: | Penetration/primer, Wood sealing, Base/primer coat |
| Casting size: | Small castings |
| ? Viscosity (density): | Low - liquid |
Product rating
Leave a rating
List of ratings
Roman Reissinger
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | DIPON.DE Removable Automotive Coatings GmbH & Co. |
|---|---|
| Address : | Ringofenstr. 39 I 44287, Dortmund, Deutschland |
| E-mail : | info@dipon.de |