Superglue Remover 59 ml | CA super glue remover with applicator | STARBOND
Code: 5952Related products
Product detailed description
STARBOND Superglue Remover 59 ml – super glue remover with a precise brush applicator
STARBOND Superglue Remover is a professional cyanoacrylate (CA) glue remover designed for safe, controlled removal of cured and uncured super glue. It helps fix bonding mistakes, remove excess glue, separate bonded parts or clean tools and work surfaces without unnecessary damage to the surrounding material. Thanks to its gel consistency it stays exactly where you apply it. It does not run like ordinary liquid removers and allows precise application even on small areas, fine joints or hard-to-reach spots.
Gentle formula without acetone helps dissolve bonds gradually and in a controlled way. It is suitable for wood, metal, rubber, ceramics, glass, stone, composites and many types of plastic. STARBOND Superglue Remover is the ideal helper for woodworkers, model makers, jewellers, 3D printing enthusiasts, DIYers and professionals.

Main benefits of STARBOND Superglue Remover
- Professional CA glue remover
- Gel formula does not run off
- Precise brush applicator
- Acetone-free formula, gentler on surfaces
- Helps free fingers glued together
- Removes cured and fresh glue
- Suitable for wood, metal, ceramics, glass and plastics
Why use STARBOND Superglue Remover
It happens to everyone: glue runs where it shouldn't, a joint is bonded wrongly, or old CA glue residue needs removing.
STARBOND Superglue Remover helps you:
The result is faster, cleaner and more professional work without unnecessary damage to your project.
Unlike ordinary liquid removers, STARBOND Superglue Remover has a thick gel consistency.
This brings several key advantages:
- separate parts glued by mistake,
- remove cured and fresh CA glue,
- clean up excess glue after repairs,
- free fingers glued together,
- fix mistakes when bonding and assembling,
- clean tools and work surfaces.
- does not run down the surface,
- stays exactly where it is applied,
- allows precise dosing,
- minimises the risk of damaging surrounding areas,
- makes work on vertical and detailed surfaces easier.
Easy to use in 3 steps

Using STARBOND Superglue Remover is very simple:
In most cases there is no need for heavy mechanical cleaning or aggressive solvents.
Apply the gel to the glued or soiled spot
Leave for approx. 10–15 minutes
Wipe off the softened glue with a cloth or wipe

Handy brush applicator
The bottle has a built-in brush for precise application without cotton swabs or other applicators.
This lets you easily:
The brush is always ready to use and allows quick work right at your workbench.
- apply the remover into narrow gaps,
- remove glue residue from details,
- work on model-making projects,
- dose exactly the amount of product you need.
Gentle acetone-free formula
STARBOND Superglue Remover uses an acetone-free formula, which is gentler on many surfaces than classic acetone-based removers.
Benefits of the acetone-free formula:
Even so, we always recommend testing on a hidden spot before applying over a larger area.
STARBOND Superglue Remover is useful for:
It is the ideal companion to all STARBOND super glues.
- gentler on finishes,
- more suitable for sensitive materials,
- lower risk of damaging the surrounding surface,
- controlled dissolving of the glue.
- repairing wood projects,
- model making,
- jewellery making,
- 3D printing,
- RC models,
- electronics repairs,
- home repairs,
- removing CA glue residue,
- cleaning tools and work surfaces.
Frequently asked questions
What types of glue is STARBOND Superglue Remover designed for?
It is designed mainly for removing cyanoacrylate glues (CA glues), also known as super glues.
Will it help free fingers glued together?
Yes. The gel formula helps safely break down a bond formed by super glue and makes it easier to separate glued skin.
Is it suitable for wood and lacquered surfaces?
Yes, but we always recommend testing first on a less visible spot. Some finishes may be sensitive.
Does it contain acetone?
No. STARBOND Superglue Remover uses an acetone-free formula that is gentler on many materials.
Does it work on cured glue too?
Yes. The remover is designed to help dissolve both fresh and cured CA glue. Thicker layers may need repeated application.
Additional parameters
| Category: | Super Glue Debonders |
|---|---|
| Weight: | 0.15 kg |
| EAN: | 000126999929 |
Product rating
Leave a rating
List of ratings
Discussion
Be the first who will post an article to this item!
The superglues professional workshops trust worldwide.
STARBOND is an American brand specialising in professional CA (cyanoacrylate) adhesives and epoxy repair systems. From the thinnest penetrating glues to thick gap-fillers — every viscosity has its exact use: wood and turning, stone and gemstone repairs, knife making, modelling and stabilising 3D prints.
Pick a colour and a viscosity — and meet your glue
Every combination shows you a specific adhesive with a full description and specs. Not sure? Start with EM-150 — the all-rounder that does a bit of everything.
The complete range, sorted by category
Everything Starbond makes, neatly sorted — from glues by viscosity to accessories.
By viscosityfrom water-thin penetration to thick gap-filler Clear range
Transparentcrystal-clear joints and a high gloss Black & brown
Colouredrepairs that blend into the wood Better value
Setsthe full kit in a single purchase Instantly
Acceleratorscuring with a single spray The rescue
Debondersdebonder for fingers and fixes Big repairs
Epoxy adhesives5-minute epoxy and repair putties Precision
Accessoriesmicro tips, nozzles, dosingThickness decides everything
A thin glue seeps into micro-cracks; a thick one fills the gap. Click along the scale — each viscosity shows what it can do and which glues offer it.
What do you make with Starbond?
Every craft has its proven combinations — each one comes with specific glues and a link to the guide. The photos are from our own projects.
Guide in the article
Furniture & tables
Fill a knot or a crack with black glue, set it with accelerator and sand it back — the repair blends into the grain. An essential step before pouring epoxy, so the slab doesn’t “leak”.
Proven glues KE-150KBL-500BR-150 Read the step-by-step guide →
For woodturners
Woodturning
Water-thin glues soak deep into the fibres: stabilising fragile wood before machining, and a high-gloss CA finish on bowls and pens. With accelerator you work with virtually no waiting.
Proven glues EM-02„Original“EM-40 Choose a glue by viscosity →
Hobby & models
Modelling & hobby
The flexible KEG-500 bond survives RC vibration and impacts; odourless NO-05 won’t blush foams or delicate parts. Fast setting holds 3D prints, cosplay and small household repairs.
Proven glues KEG-500NO-05EM-150 Explore the superglues →
Professional quality you notice from the first drop.
Fresh batches, precise viscosities and applicators that put the glue where it belongs — not on your fingers.
- Industrial-grade CA purity — strong bonds on wood, metal, stone and plastics
- Every bottle comes with application tips for precise dosing
- 30-month shelf life — the glue won’t dry out before you use it up
- A complete system: glues + accelerator + debonder from one brand
Glue + accelerator + debonder = full control
Four products, one working whole: the glue bonds, the accelerator cures it instantly, the debonder undoes a step, and micro tips dose it precisely.
Glue EM-150Bonds. Pick the viscosity and colour to suit the repair — the EM-150 all-rounder handles most of them. 2
AcceleratorCures. Spray the other side of the joint — sets in seconds, no waiting. 3
DebonderUndoes. Dissolves glued fingers and a joint gone wrong. +
Micro tipsDose. In every bottle — the glue ends up exactly where it should.All 11 Starbond glues in one table
From the thinnest to the thickest, including the coloured and the flexible ones. Highlighted rows ★ TOP = our best sellers.
| Glue | Colour | Viscosity | Consistency | Strongest suit | |
|---|---|---|---|---|---|
| EM-02 Super Fast Thin★ TOP | clear | 2–3 cP | like water | penetrating hairline cracks, stabilisation | Detail |
| „Original“ Super Thin | clear | 2–3 cP | like water | the classic for woodturners and finishing | Detail |
| NO-05 Odorless | clear | 2–3 cP | ultra thin | odourless, no blushing — foams and delicate work | Detail |
| EM-40 Heavy Thin | clear | 40 cP | medium thin | fine gaps, inlays with powders | Detail |
| EM-150 Medium★ TOP | clear | 150 cP | like motor oil | all-rounder for 10 materials, sets in 10–20 s | Detail |
| KE-150 Black Medium★ TOP | black | 150 cP | medium | invisible repairs in dark wood, rubber in the formula | Detail |
| BR-150 Brown Medium | brown | 150 cP | medium | blends with walnut, oak and teak | Detail |
| KBL-500 Black Med-Thick★ TOP | black | 500 cP | thick | wider gaps and knots, won’t run on vertical surfaces | Detail |
| BR-500 Dark Brown | dark brown | 500 cP | thick | larger fills that blend into dark wood | Detail |
| KEG-500 Flexible | clear·flex | 500 cP | thick · flexible | a tough bond — vibration, RC, automotive, leather | Detail |
| EM-2000 Gap-Filler | clear | 2000 cP | like honey | a clear “filler” — gaps, voids, missing material | Detail |
What you ask us about Starbond
How is Starbond different from an ordinary superglue from the shop?
Industrial-grade cyanoacrylate purity, a precisely defined viscosity and fresh batches. An ordinary glue comes in one thickness and you have no idea how long it sat in a warehouse. Starbond has six viscosities from 2 to 2000 cP, each for a different job, and a 30-month shelf life.
Which viscosity should I pick if I’m not sure?
EM-150 Medium. At 150 cP (roughly motor oil) it will both seep into gaps and fill smaller voids — one glue for wood, stone, ceramics, leather and most plastics. Sets in 10–20 seconds.
What is the accelerator for, and do I need it?
CA glue cures with airborne moisture — the accelerator triggers the reaction instantly. It pays off with thick glues, large fills and on dry wood, where the glue would cure slowly. Spray the other side of the joint, not the glue itself.
How should I store Starbond so it lasts?
Cool, dry and tightly closed — ideally in the fridge (let it warm to room temperature before use, or moisture will condense). Wipe the bottle after use so the neck doesn’t glue shut. Unopened, it lasts 30 months.
