Starbond 30-Minute Toughened Epoxy Pro Kit 236 ml – 30 minute epoxy, toughened two-part epoxy adhesive 1:1

Code: 8974
Not rated Rating details
40,53 € 33,50 € excl. VAT Measure price:
IN STOCK (5 pcs)
Delivery to:
18/11/2026
Delivery options

30-Minute Toughened Epoxy Pro Kit — a two-part epoxy adhesive, 1:1 by volume, that cures strong yet slightly flexible: it absorbs shocks and vibration instead of cracking. 30–35 minutes of working time for precise assembly, handling strength in 7–10 h, full cure in 12 h. Strength of 47.6 MPa verified by an independent laboratory, clear with no yellowing. Bonds wood, metal, glass, ceramics, concrete and fabric. A mixing palette and a non-stick spatula are included.

⏱️ 30–35 min working time 💪 47.6 MPa · toughened ⚖️ 1:1 ratio by volume 🧰 Palette + spatula included
 

Detailed information

Product detailed description

Starbond · 30-Minute Toughened Epoxy · Pro Kit

An epoxy adhesive that won't crack. 30 minutes for precise assembly, ready by morning.

Ordinary epoxy cures hard and brittle — and cracks on impact. Thanks to its polyaminoamide hardener, Starbond 30-Minute Toughened Epoxy cures strong and slightly flexible at the same time: the joint absorbs shocks and vibration instead of breaking under them. Add 30–35 minutes of working time to seat, align and clamp even complex assemblies, handling strength in 7–10 hours and full cure in 12 hours. A strength of 47.6 MPa (6,898 psi) was verified by an independent accredited laboratory.

🛡️ Toughened bond — absorbs shocks, won't crack ⚖️ 1:1 ratio by volume 💧 Water-resistant · clear · non-yellowing 🧰 Palette and spatula included
30–35 minworking time after mixing
7–10 hhandling strength
12 hfull cure — 2× faster than typical toughened epoxies
47.6 MPastrength (6,898 psi), TAF laboratory
Where to use it

Joints that live under load

Knife handles, golf clubs, fishing rods, musical instruments, structural woodworking joints — anywhere a rigid epoxy eventually cracks.

Bonding a knife handle with Starbond 30-Minute epoxy adhesive

Knife handles

Bone, G10, micarta or wood onto a steel tang — the joint absorbs the blows.

Bonding a golf club – shaft into hosel – with Starbond 30-Minute epoxy

Golf clubs and rods

Shaft into hosel, cork onto blank — holds under the torque of the swing.

Structural woodworking joint bonded with Starbond 30-Minute epoxy

Woodworking joints

Multi-material assemblies, lutherie, tool repairs.

Starbond 30-Minute Toughened Epoxy Pro Kit – two-part 1:1 epoxy adhesive with palette and spatula
Pro Kit 2× 118 ml
Strong, but not brittle

A joint that absorbs impact instead of cracking.

A knife handle takes a hit with every strike, a golf club twists the head on the hosel through the swing, a rod handle carries the load of every cast. In these spots a rigid epoxy eventually lets go. Starbond's toughened formula cures strong and slightly flexible — the joint works with the material, not against it. Bone to steel. G10 to tang. Cork to blank. Graphite to hosel. One epoxy for all of it.

  • the toughened bond absorbs shocks and vibration — no cracking, no delamination
  • strength of 47.6 MPa (6,898 psi) verified by an independent laboratory (TAF)
  • cures light amber, finished joints are clear — no yellowing
  • water-resistant bond
2× 118 mlpart A + part B
60–90 smixing to a uniform blend
Dispensing Starbond 30-Minute Epoxy parts A and B 1:1 onto the mixing palette
Equal parts A + B
30 minutes to work

Get it right the first time.

The slow-setting formula gives you 30–35 minutes of working time — enough to insert and turn a golf shaft, seat a knife handle, reposition a guitar brace or assemble a multi-part joint without rushing. Handling strength in 7–10 hours, full cure in 12 hours: the assembly is ready to use in the morning, not the day after tomorrow.

  • wood · metal · glass · ceramics · concrete · fabric
  • plastics and rubber only after a test on a sample
  • the Pro Kit includes a non-stick mixing palette and spatula — proper mixing without hunting for tools
How to use it

Step-by-step instructions

Proper mixing is everything — that's why the Pro Kit includes a palette and a spatula.

1

Prepare the surfaces

Clean, dry, degreased; lightly scuff smooth metal or glass.

2

Dispense equal parts

Equal volumes of A and B onto the palette — the 1:1 ratio is by volume; don't measure it on a scale.

3

Mix for 60–90 seconds

Slowly with the spatula, until the blend is uniform with no streaks.

4

Apply and assemble within 30–35 minutes

Seat, align, clamp.

5

Let it cure

Handle after 7–10 h, full strength after 12 h at room temperature.

⚠️ The most common mistake

Under-mixed blend and a cold workshop. Streaks in the mix or a temperature below room temperature = a tacky, incompletely cured joint. Mix for the full 60–90 s until the colour is uniform and let it cure at room temperature — cold lengthens the times, warmth shortens them.

5 minutes or 30?

Choose the epoxy by the job

Quick repairs call for 5-Minute Epoxy, complex assemblies for 30-Minute. Both 1:1, both toughened.

  Quick repairs5-Minute Epoxy KitDetails Complex assemblies ★30-Minute Epoxy Pro KitThis product
Best forquick repairs, filling gapscomplex assemblies, precise alignment of parts
Working time5–7 min30–35 min
Full cureapprox. 24 h12 h
Mixing ratio1:11:1
Pack240 ml236 ml + palette and spatula
🧭 A different job? For a flexible bond in seconds, reach for the cyanoacrylate Flexible KEG-500; for clear tabletop pours there is ClarityPro Tabletop — not an adhesive, but a final pour coat.
Technical data

Specifications you can rely on

Source: technical data sheet TDS2026-1006-01 (manufacturer's data + Czech safety data sheets v2)

Typetwo-part epoxy adhesive, toughened
Pack236 ml (8 oz) · A 118 ml + B 118 ml · palette + spatula
Mixing ratio1 : 1 by volume
Working time30–35 minutes
Handling strength7–10 hours
Full cure12 hours (room temperature)
Strength47.6 MPa (6,898 psi) · verified by TAF laboratory
Hardenerpolyaminoamide — a flexibly toughened bond
Colour when curedlight amber, clear in the joint · non-yellowing
Bondswood · metal · glass · ceramics · concrete · fabric
Limitationsplastics and rubber only after a prior test
Originmade in Taiwan (as stated on the box)

Lower temperature lengthens curing, higher shortens it — the times apply at room temperature.

Storage

Storage

  • cool and dry, bottles tightly closed
  • never swap parts A and B or mix them in the bottles
  • out of reach of children
What you ask

Frequently asked questions

The difference from ordinary epoxy, times, materials and mixing.

What does “toughened” epoxy mean?

Ordinary epoxy cures hard and brittle. Starbond's toughened formula with a polyaminoamide hardener cures strong and slightly flexible at the same time — the joint absorbs shocks and vibration instead of cracking under them. That is why it suits knife handles, golf clubs and fishing rods.

How long do I have to work, and when is the joint done?

After mixing you have 30–35 minutes to apply, seat and clamp. The joint reaches handling strength in 7–10 hours and full strength in 12 hours at room temperature.

What's the difference from 5-Minute Epoxy?

Both are 1:1 toughened epoxies. 5-Minute is for quick repairs (5–7 minutes of working time), 30-Minute for complex assemblies where you need time for precise alignment — golf shafts, knife handles, multi-part joints.

What materials does it bond?

Wood, metal, glass, ceramics, concrete and fabric. The manufacturer does not recommend plastics and rubber without a prior test on a sample.

How do I mix it properly?

Dispense equal volumes of A and B — the 1:1 ratio is by volume; the parts have different densities, so equal grams would shift the ratio — and mix slowly for 60–90 seconds until the blend is uniform. The non-stick palette and spatula are in the pack.

Is the joint clear, and does it yellow?

The adhesive cures light amber; in a thin joint it is clear and, according to the manufacturer, does not yellow.

How do I handle the adhesive safely?

Both parts irritate the skin, the resin may cause an allergic skin reaction and the hardener causes serious eye damage — work with gloves and safety glasses and wash your hands afterwards. Do not pour uncured material down the drain. Details are in the safety data sheets for both parts above.

BEZPEČNOSTNÍ INFORMACE O PRODUKTU (CLP)Klasifikace a pokyny dle bezpečnostních listů

Dvousložkový produkt — každá složka má vlastní klasifikaci a bezpečnostní list (CZ bezpečnostní listy, verze 2, 10/2026).

Složka A — pryskyřice

GHS07 — dráždivé látky GHS09 — nebezpečnost pro životní prostředí

VAROVÁNÍ · obsahuje epoxidovou pryskyřici z bisfenolu A a epichlorhydrinu (průměrná početní molekulová hmotnost ≤ 700)

Standardní věty o nebezpečnosti:
H315 Dráždí kůži. · H317 Může vyvolat alergickou kožní reakci. · H319 Způsobuje vážné podráždění očí. · H411 Toxický pro vodní organismy, s dlouhodobými účinky.

Pokyny pro bezpečné zacházení:
P101 Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku. · P102 Uchovávejte mimo dosah dětí. · P264 Po manipulaci důkladně omyjte ruce a zasažené části těla. · P280 Používejte ochranné brýle/ochranné rukavice/ochranný oděv. · P391 Uniklý produkt seberte. · P501 Odstraňte obsah/obal předáním oprávněné osobě k nakládání s odpady nebo vrácením dodavateli.

Doplňující informace: EUH205 Obsahuje epoxidové složky. Může vyvolat alergickou reakci.

Složka B — tvrdidlo

GHS05 — korozivní a žíravé látky GHS09 — nebezpečnost pro životní prostředí

NEBEZPEČÍ · obsahuje polyamidovou pryskyřici

Standardní věty o nebezpečnosti:
H315 Dráždí kůži. · H318 Způsobuje vážné poškození očí. · H411 Toxický pro vodní organismy, s dlouhodobými účinky.

Pokyny pro bezpečné zacházení:
P101 Je-li nutná lékařská pomoc, mějte po ruce obal nebo štítek výrobku. · P102 Uchovávejte mimo dosah dětí. · P264 Po manipulaci důkladně omyjte ruce a zasažené části těla. · P280 Používejte ochranné rukavice/ochranný oděv/ochranné brýle/obličejový štít. · P305+P351+P338 PŘI ZASAŽENÍ OČÍ: Několik minut opatrně vyplachujte vodou. Vyjměte kontaktní čočky, jsou-li nasazeny a pokud je lze vyjmout snadno. Pokračujte ve vyplachování. · P310 Okamžitě volejte lékaře. · P391 Uniklý produkt seberte. · P501 Odstraňte obsah/obal předáním oprávněné osobě k nakládání s odpady nebo vrácením dodavateli.

Additional parameters

Category: Epoxy Adhesives - High Strength and Versatile Use
Weight: 0.36 kg
EAN: 000126830086
? Processing time: Medium
Colour: Clear
? Type: Epoxy
Form: Liquid adhesive (2 components)
Suitable for: Wood, Metal, Glass and ceramics, Stone and concrete

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

Vložením hodnocení souhlasíte s podmínkami ochrany osobních údajů

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů

Starbond · Premium Superglues · Los Angeles, USA

The superglues professional workshops trust worldwide.

STARBOND is an American brand specialising in professional CA (cyanoacrylate) adhesives and epoxy repair systems. From the thinnest penetrating glues to thick gap-fillers — every viscosity has its exact use: wood and turning, stone and gemstone repairs, knife making, modelling and stabilising 3D prints.

🇺🇸 Made in the USA 🎯 Viscosities 2–2000 cP ⏱ Sets in seconds 📦 30-month shelf life
6viscosities — from water to honey
3colours: clear, black, brown
24products in stock with us
30months of shelf life
Find your glue

Pick a colour and a viscosity — and meet your glue

Every combination shows you a specific adhesive with a full description and specs. Not sure? Start with EM-150 — the all-rounder that does a bit of everything.

 
The world of Starbond

The complete range, sorted by category

Everything Starbond makes, neatly sorted — from glues by viscosity to accessories.

A short course in viscosity

Thickness decides everything

A thin glue seeps into micro-cracks; a thick one fills the gap. Click along the scale — each viscosity shows what it can do and which glues offer it.

 
For your craft

What do you make with Starbond?

Every craft has its proven combinations — each one comes with specific glues and a link to the guide. The photos are from our own projects.

Repairing a knot with black Starbond glue before pouring epoxyGuide in the article

Furniture & tables

Fill a knot or a crack with black glue, set it with accelerator and sand it back — the repair blends into the grain. An essential step before pouring epoxy, so the slab doesn’t “leak”.

Proven glues KE-150KBL-500BR-150 Read the step-by-step guide →
Applying Starbond Super Fast Thin to a turned wooden pieceFor woodturners

Woodturning

Water-thin glues soak deep into the fibres: stabilising fragile wood before machining, and a high-gloss CA finish on bowls and pens. With accelerator you work with virtually no waiting.

Proven glues EM-02„Original“EM-40 Choose a glue by viscosity →
Repairing an RC model with Starbond Medium Multi-PurposeHobby & models

Modelling & hobby

The flexible KEG-500 bond survives RC vibration and impacts; odourless NO-05 won’t blush foams or delicate parts. Fast setting holds 3D prints, cosplay and small household repairs.

Proven glues KEG-500NO-05EM-150 Explore the superglues →
Starbond EM-150 Medium — professional CA adhesive
⏱ Sets in 10–20 s
Why Starbond

Professional quality you notice from the first drop.

Fresh batches, precise viscosities and applicators that put the glue where it belongs — not on your fingers.

  • Industrial-grade CA purity — strong bonds on wood, metal, stone and plastics
  • Every bottle comes with application tips for precise dosing
  • 30-month shelf life — the glue won’t dry out before you use it up
  • A complete system: glues + accelerator + debonder from one brand
Los Angelesdeveloped and made in the USA
2–2000 cPthe widest range of viscosities on the market
The Starbond system

Glue + accelerator + debonder = full control

Four products, one working whole: the glue bonds, the accelerator cures it instantly, the debonder undoes a step, and micro tips dose it precisely.

The full range

All 11 Starbond glues in one table

From the thinnest to the thickest, including the coloured and the flexible ones. Highlighted rows ★ TOP = our best sellers.

Glue Colour Viscosity Consistency Strongest suit
EM-02 Super Fast Thin★ TOP clear 2–3 cP like water penetrating hairline cracks, stabilisation Detail
„Original“ Super Thin clear 2–3 cP like water the classic for woodturners and finishing Detail
NO-05 Odorless clear 2–3 cP ultra thin odourless, no blushing — foams and delicate work Detail
EM-40 Heavy Thin clear 40 cP medium thin fine gaps, inlays with powders Detail
EM-150 Medium★ TOP clear 150 cP like motor oil all-rounder for 10 materials, sets in 10–20 s Detail
KE-150 Black Medium★ TOP black 150 cP medium invisible repairs in dark wood, rubber in the formula Detail
BR-150 Brown Medium brown 150 cP medium blends with walnut, oak and teak Detail
KBL-500 Black Med-Thick★ TOP black 500 cP thick wider gaps and knots, won’t run on vertical surfaces Detail
BR-500 Dark Brown dark brown 500 cP thick larger fills that blend into dark wood Detail
KEG-500 Flexible clear·flex 500 cP thick · flexible a tough bond — vibration, RC, automotive, leather Detail
EM-2000 Gap-Filler clear 2000 cP like honey a clear “filler” — gaps, voids, missing material Detail
Advice

What you ask us about Starbond

How is Starbond different from an ordinary superglue from the shop?

Industrial-grade cyanoacrylate purity, a precisely defined viscosity and fresh batches. An ordinary glue comes in one thickness and you have no idea how long it sat in a warehouse. Starbond has six viscosities from 2 to 2000 cP, each for a different job, and a 30-month shelf life.

Which viscosity should I pick if I’m not sure?

EM-150 Medium. At 150 cP (roughly motor oil) it will both seep into gaps and fill smaller voids — one glue for wood, stone, ceramics, leather and most plastics. Sets in 10–20 seconds.

What is the accelerator for, and do I need it?

CA glue cures with airborne moisture — the accelerator triggers the reaction instantly. It pays off with thick glues, large fills and on dry wood, where the glue would cure slowly. Spray the other side of the joint, not the glue itself.

How should I store Starbond so it lasts?

Cool, dry and tightly closed — ideally in the fridge (let it warm to room temperature before use, or moisture will condense). Wipe the bottle after use so the neck doesn’t glue shut. Unopened, it lasts 30 months.