DIPON LuminaCast 6 Art Flow 3 kg - High Viscosity Epoxy Resin, Thickness 20 mm
Code: 7298/003000Related products
Product detailed description
Art Flow 3 kg. Resin for painting techniques and top coats.
Pack 3 kg — most popular pack — regular painting and top coats of smaller boards. High-viscosity system for resin artists: holds brushstroke texture, does not run off edges and creates a flawless glossy finish. Layer 1–20 mm, refractive index > 1.59.
From painting to the final gloss.
Art Flow is built for painting techniques, top coats of boards and tables, and sealing — everywhere density means control.
Paintings & painting techniques
The thick consistency holds strokes and paint texture.
Top coat for tables and boards
A final glossy layer with the depth of glass.
Ocean art
Waves and transitions that stay where you paint them.
How much resin for your project?
Click on a size — you will see the current price and availability right next to it.
and tests Most popular3 kgregular
making 7,5 kgtop coat
large boards 15 kgstudio
and courses Best price/kg30 kgfull
production
A density that holds strokes.
4100 mPa·s means a more paste-like flow: brush and spatula strokes hold their texture, layers do not spread and the final top coat gains the depth of glass.
- 4100 mPa·s — paint texture holds its shape
- A top coat with a flawless glossy finish
- UV absorbers + HALS — no yellowing in the long term
- Very low shrinkage < 0.1 %
The same DNA as the whole LuminaCast range.
Every LuminaCast system is made at DIPON's own production site in Germany: UV absorbers + HALS additives against yellowing, a formulation free of substances on the sVHC and CoRAP lists, and degassing components more than 70 % from renewable sources.
- UV absorbers + HALS — no yellowing in the long term
- Free of sVHC and CoRAP substances
- The systems in the range combine in a project — each has its role
Parameters you can rely on
Measured at 23 °C, 200 g, 20 mm layer — source: DIPON TDS
Compatible with wood, concrete, glass, metal, glass and carbon fibre fabrics, natural stone, silica sand, marble and granite.
Your first painting will work out too
Check the temperature
Material and surroundings at room temperature. High temperature = fast exotherm, yellowing and cracks.
Test the substrate
A preliminary compatibility test of the materials you are going to embed.
Weigh out exactly 2:1
Always by weight (100:50). Maximum deviation 0.1 % — more means a sticky film or a soft casting.
Mix twice for 3–4 minutes
Mix → pour into a clean container → mix again. Max. 300 rpm, ideally with with an Allway Helix mixer.
Paint it or pour over it
Strokes hold their texture, spread the top coat up to 20 mm. The surface is ready to demould after 16–24 hours.
⚠️ The most common mistake
Never mix by eye straight from bottles A and B. An inaccurate ratio = incomplete curing. Always weigh both components to the gram. Cleaning tools: acetone or universal thinner, immediately after use.
A set for resin art — resins that belong together
One painting, four roles: base, paint, precise detail and effects. Combine them.
| LuminaCast 3Crystal FlowDetail | LuminaCast 6 ★Art FlowThis product | LuminaCast 7Design FlowDetail | LuminaCast 10Cell FlowDetail | |
|---|---|---|---|---|
| Role in the project | Laminating and substrates | Painting techniques and top coat | Precise design, thin layers | Cell effects and ocean waves |
| Max. casting thickness | 10 mm | 20 mm | 20 mm | 20 mm |
| Working time | 35 min | 50 min | 50 min | 50 min |
| Viscosity (23 °C) | 140 mPa·s | 4100 mPa·s | 5500 mPa·s | 2500 mPa·s |
📊Compare the whole LuminaCast rangeAll 10 hardeners — viscosity, working time and casting thickness in one clear table▼
| Type | Viscosity* (23 °C) | Working time** | Max. casting thickness | Use |
|---|---|---|---|---|
| LC 1 Fast Set Primer | 120 mPa·s | 15 min | 7 mm | priming and sealing coat for wood, overpour after 60–120 min |
| LC 2 Coaster Cast | 290 mPa·s | 35 min | 15 mm | highly transparent embedding and shapes |
| LC 3 Crystal Flow | 140 mPa·s | 35 min | 10 mm | laminating & resin art |
| LC 4 Gem Flow | 890 mPa·s | 55 min | 20 mm | art & embedding, thicker pours |
| LC 5 Radiant Flow | 1330 mPa·s | 60 min | 20 mm | art & embedding, slower flow |
| LC 6 Art Flow ★ | 4100 mPa·s | 50 min | 20 mm | painting techniques, top coat, sealing |
| LC 7 Design Flow | 5500 mPa·s | 50 min | 20 mm | special spreading, thin layers |
| LC 8 Table Flow | 70 mPa·s | 180 min** | 5 cm | river tables, lamps, larger castings |
| LC 9 Ocean Flow | 50 mPa·s | 240 min** | 10 cm | river tables and very large castings |
| LC 10 Cell Flow | 2500 mPa·s | 50 min | 20 mm | cell effects, Petri art |
* Viscosity at 23 °C — it rises sharply as the temperature drops. ** Measured on 200 g; LC 8 and LC 9 on 500 g / 9 cm. Time to max. exotherm ≈ 2× the working time.
★★★★★ from those who already create
„A quality thick resin. Lovely to work with. Good working time.“
Elena J. · verified purchase
„I am satisfied, it is nice to work with“
Veronika N. · verified purchase
„Great for poor-man's kintsugi! :)“
Vítězslav A. · verified purchase
„An amazing resin for making things, clear and pigments combine beautifully.“
Zbyněk K. · verified purchaseHow much Art Flow resin do you need?
Enter the dimensions of your casting — we will calculate the amount, the component ratio and the best pack combination.
Frequently asked questions
How thick a layer can I pour?
1–20 mm in a single layer at 20 °C. Next layer after 12–16 hours.
Is it suitable as a final top coat?
Yes — the thick consistency spreads across the surface, does not run off edges and cures to a glossy finish with the depth of glass.
How does it differ from the casting systems in the range?
By density: 4100 mPa·s holds stroke texture and layers. The range has other specialists for deep pours — every LuminaCast system has its role.
How much will 3 kg cast?
3 kg of mixture (components A + B) equals approximately 2.8 l of casting (density 1.07 kg/l). The calculator above works out the exact amount for your project.
Why is 3 kg the most popular pack?
It is the most versatile balance of quantity and storage — approx. 2.8 litres of mixture covers most common projects.
Your canvas is waiting.
Additional parameters
| Category: | Epoxy Resins |
|---|---|
| Weight: | 3.24 kg |
| ? Processing time: | Medium |
| Epoxy system: | LuminaCast 6 |
| Colour: | Clear, Highly transparent |
| Package weight: | 3 Kg |
| Refractive index: | > 1,59 |
| Food contact: | Yes |
| Max casting thickness: | 2 cm |
| ? UV Resistance: | Yes, Maximum |
| ? Temperature resistance: | 70 °C |
| ? Hardness: | 72 ShD |
| Type of use: | Casting, Art, Petri Art, Floors, Floor sealing, 3D floors, 3D floor finishing, Art paintings, Artistic tumbler design, Furniture finishing, Mirror-gloss surfaces, Worktops |
| Casting size: | Small castings |
| ? Viscosity (density): | High - thick |
Product rating
Leave a rating
List of ratings
Monika
Daniel Svatoš
Milan Novák
Discussion
Be the first who will post an article to this item!
| Manufacturing company : | DIPON.DE Removable Automotive Coatings GmbH & Co. |
|---|---|
| Address : | Ringofenstr. 39 I 44287, Dortmund, Deutschland |
| E-mail : | info@dipon.de |